NanoSeptic Products FAQ's

How Does the NanoSeptic surface work?

One of the components of the surface is a mineral nano-crystal which acts as a catalyst, charged by visible light.  These nano-crystals create a continuous oxidation reaction stronger than bleach.  This oxidation reaction breaks down organic material into base components such as CO2.  The surface also forms free radicals which act as an additional cleaning agent.  

What do you mean by "Self-Cleaning"?

The NanoSeptic surface continuously oxidizes organic contaminants at the microscopic level.  Large scale contaminants must still be removed to allow the surface to do it's job.  This is similar to disinfectants, which require surfaces to be cleaned before the disinfectant can be effective.

How Should I clean NanoSeptic surfaces?

NanoSeptic surfaces are not affected by traditonal non-abrasive cleaners.  We recommend wiping the surface with a microfiber cloth and water to remove large-scale contaminants.  Do not use abrasive cleaners or cleaning utensils which might compromise the NanoSeptic surface.

How long do NanoSeptic products last?

We recommend replacing facility touch point skins every 90 days (quarterly).  In some high traffic applications, they may need to be replaced more often.  Mats, mousepads and tissue box covers should be replaced annually.  Nothing gets used up or expires, so the products' shelf life is virtually unlimited.  Product life is dependent on actual physical wear.

How do I know When to replace NanoSeptic surfaces?

The easiest rule to follow is to replace the skins quarterly and the other products annually.  The print can also serve as an indicator, so if the text or graphic becomes worn or faded, it's time to replace.  Another indicator is if the skin starts to peel off, we recommend replacement to keep the touch point looking good.